The prevention process of road stone water spot
Jul 31,2025
The prevention process of road stone water spot
The pre-prevention work of road stone water spots starts from the owner side, the design side and the paving side.
1. The owner of the road stone
① The owner uses stone products with dense structure and low water absorption.
② The wall building should pay attention to dry hanging, and the ground should be paved with special stone glue.
2. Design method of road stone
① Pay attention to the moisture-proof work of the stone related to the road stone when designing, and the corresponding tide insulation pad. Pay attention to the direct or indirect link between the road stone and the water source.
② The cement sand layer prepared by the construction personnel will reserve water vapor channels, such as ventilation pipes can be installed, and the water vapor from the external environment will run away from the pipes.
3. Paving of stone
① Use cement.
(2) In the paving activity, the construction personnel should pay attention to controlling the amount of usable water, such as: using semi-dry mortar, or scraping to further slow down the amount of mortar.
(3) During the paving and maintenance activities, the stone products should not be rained or washed.
④ Road stone and other stone varieties do not use strong acid to clean the cement spot on the surface of road stone stone, rust yellow.
(5) Avoid flooding of the loaded road stone or being in a wet state for a long time
TAG:
Recent News
Realistic Wax Sculptures: The Art of Crafting Lifelike Masterpieces
